F4-72 FRP centrifugal fan is based on metal-fan 4-72 parameters used FRP composite material made of.
Fans of the series can be acid-base composition and transmission of the chemical constituents of corrosive gases. Not by the transmission of gas containing viscous substances contained
Rigid and dust particles ≤ 150 mg/m3, ≤ 60 ℃ gas temperature, relative humidity ≤ 100%. Fan of the series with high strength, weight
Light, it is not easy aging, good corrosion resistance, low noise, smooth running characteristics. Is an ideal general-purpose anti-corrosion fan.
Fans of the series widely used in chemical industry, electroplating, oxidation, power plants, laboratories, circuit boards, and environmental protection equipment, such as gas containing corrosive
In place.
BF4-72 FRP blast centrifugal fan is based on the conditions of use, or distribution of EXdI EXdII Class A, B Grade at Ex
From the type produced by motor. Transmission may contain methane, ethane, propane, styrene, toluene, xylene, carbon monoxide, acetic acid,
Kerosene, petrol and furans, flammable, explosive volatile gases. Its performance parameters and installation size and F4-72 FRP centrifugal ventilation
The same machine. (B) F4-72 (C-)-FRP centrifugal impeller fan is using cold water or oil Block by Block angle and motor drive belt.
Its benefits are reduced electrical corrosion, deceleration, such as reducing the electrical load, thereby increasing the life of fans.